从零开始学wlan
FAT AP + FIT AP
无线控制器,或者说路由器(FAT AP)通过二层POE交换机连接多个AP,通过WiFi名称(SSID)传输到终端。
AC+AP组网所需的物理条件
- 无线AP---收发无线信号;
- 无线控制器(AC)---用来控制管理多个AP;
- PoE交换机--能给AP实现网络连接和供电的交换机;
- 授权:默认AC管理的AP数量有限,买授权才能管控更多AP。
以及 WLAN组网与转发详解-CSDN博客 组网方式的介绍。
配置示例
wlan配置——瘦AP配置【拓扑简单,代码详细,命令解释】_wlan配置瘦ap-CSDN博客
华为无线实验:利用AC管理AP,并且无线用户能够上网_无线实验ac控制ap-CSDN博客
国家区域也不是必须要设置的:中国范围内不能使用完整的WIFI 6E和WIFI 7,华为推出的WIFI 7路由器有什么用? - 知乎
AC创建AP WLAN组网流程
拓扑及配置
LSW1
vlan batch 10 30
dhcp enable
ip pool ap
gateway-list 192.168.1.254
network 192.168.1.0 mask 255.255.255.0
option 43 sub-option 2 ip-address 1.1.1.1
interface Vlanif10
ip address 192.168.1.254 255.255.255.0
dhcp select global
interface Vlanif30
ip address 1.1.1.2 255.255.255.0
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan all
LSW2
vlan batch 10
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
interface Ethernet0/0/2
port link-type access
port default vlan 10
interface Ethernet0/0/3
port link-type access
port default vlan 10
AC1
vlan batch 30
interface Vlanif30
ip address 1.1.1.1 255.255.255.0
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan all
wlan
security-profile name securityprofile
security wpa-wpa2 psk pass-phrase 12345678 aes
ssid-profile name ssid-cfg-1
ssid wifi-test
vap-profile name vap-cfg-1
ssid-profile ssid-cfg-1
security-profile securityprofile
ap-group name ap-group1
vap-profile vap-cfg-1 wlan 1 radio 0
ap auth-mode mac-auth
ap-id 1 ap-mac 00e0-fc07-0840
cap wap source interface vlanif30